HEARING AID COMPATIBILITY (HAC)
TEMPORARY TONE DIALING
RECEIVING AND STORING CID RECORDS
25830
BEFORE YOU BEGIN
INSTALLING THE PHONE
SET UP
This telephone system meets FCC standards for Hearing Aid Compatibility.
This feature is useful only if you use pulse dialing service.Temporary tone dialing
enables pulse (rotary) service phone users to access touch-tone services offered by
banks, credit card companies, etc. For example, when you call your bank you may
need to enter your account number. Using the temporary tone feature allows you to
temporarily switch to touch tone mode so you can enter and send your number.
When you receive a call, the information is transmitted by the phone company to
your Caller ID telephone between the first and second ring.
There are four programmable menus available: Language, Area Code, SetTone/Pulse,
and Default Setting.
5.8 GHz CallWaiting Caller ID
Digital CordlessTelephone
User's Guide
US NUMBER IS LOCATED ONTHE CABINET BOTTOM
REN NUMBER IS LOCATED ONTHE CABINET BOTTOM
PARTS CHECKLIST
Make sure your package includes the items shown here.
When the memory is full, a new call automatically replaces the oldest call in
memory. NEW appears in the display for calls received that have not been reviewed.
INTRODUCTION
DISPLAY LANGUAGE
1. Press the program button until 1ENGLISH 2FRA 3ESP shows in the display.
1ENGLISH is the default setting.
NOTE: Check with your local phone company regarding name service availability.
1. Dial the telephone number and wait for the line to connect.
CAUTION: When using telephone equipment, there are basic safety
instructions that should always be followed. Refer to the IMPORTANT
SAFETY INSTRUCTIONS provided with this product and save them for
future reference.
2. When your call is answered, press the *tone/exit button on your handset number
pad to temporarily change from pulse dialing to tone dialing.
Belt clip
2. Use the CID/vol (+ or -) button or the touch-tone pad on the handset to enter your
selection.
REVIEWING CID RECORDS
As calls are received and stored, the display is updated to let you know how many
calls have been received.
3. Follow the automated instructions to get the information you need.
3. Press program again to save.
4. Hang up the handset and the phone automatically returns to pulse (rotary)
dialing mode.
Your Call Waiting Caller ID phone stores and displays specific information, provided
by your local telephone company, to subscribers of Caller ID or similar caller
identification services.
charge
•
Press the CID/vol - button to scroll through the call records from the most recent to
the oldest.
Battery
compartment
door
Handset
Base
Handset
battery
Line cord
Mounting
bracket
AC power
supply
LOCAL AREA CODE
1. Press the program button until SET AREA CODE - - - shows in the display. - - - is the
default setting.
EXIT
Choose the best location to install your cordless telephone.Your cordless telephone
should be placed on a level surface, such as a desk or table top, or you may mount it
on a wall. A wall mounting pedestal is packaged with your phone.
Your Call Waiting Caller ID phone enables you to:
•
Press the CID/vol + button to scroll through the call records from the oldest to the
newest.
Press the *tone/exit button to cancel any command you initiated.
•
•
•
•
Identify callers before you answer the phone.
View the time and date of each incoming call.
Record up to 40 Caller ID messages sequentially.
Know who called while you were away.
Wall plate
TELEPHONE JACK REQUIREMENTS
To use this phone, you need an RJ11C type modular telephone
jack, which might look like the one pictured here, installed in
your home. If you don’t have a modular jack, call your local
phone company to find out how to get one installed.
2. Use the touch-tone pad on the handset to enter your three digit area code.
3. Press program again to save.
NOTE : The handset may be charged facing up or down.
TRANSFERRING CID RECORDS TO MEMORY
1. Make sure the phone is OFF (not inTALK mode).
2. Press the CID/vol (+ or -) button to scroll to the desired CID record.
3. Press the memory button.
FINDING THE HANDSET
This feature helps to locate a misplaced handset.
Modular
telephone
line jack
NOTE: If you make a mistake, press the delete button to erase a wrong number.
INSTALLING THE BATTERY PACK
1. Insert the battery pack.
Press the page button on the base.The handset beeps continuously for about 2
minutes or until you press the talk/callback button on the handset or the page button
on the base.
To get the most from your new phone, we suggest that you take a few minutes
right now to read through this user's guide.
TONE/ PULSE DIALING
1. Press the program button until SET TONE/PULSE 1TONE 2PULSE shows in the
display. 1TONE is the default setting.
IMPORTANT: In order to use all of the features of this unit, you must subscribe
to either the standard Name/ Number Caller ID Service or Call Waiting Caller ID
Service. To know who is calling while you are on the phone, you must subscribe
to Call Waiting Caller ID Service.
DIGITAL SECURITY SYSTEM
Your cordless phone uses a digital security system to protect against false ringing,
unauthorized access, and charges to your phone line.
4. Press a number key (0 - 9) to store the number in that memory location.You will
hear a confirmation tone.
2. Plug the battery pack cord into the jack (inside the compartment).
3. Replace the compartment door.
NOTE: You may still page the handset when the ringer is off.
To Replace an Old Record with a New Record:
2. Use the CID/vol (+ or -) button or the touch-tone pad on the handset to scroll to
1TONE or 2PULSE.
1. Repeat steps 1 through 4 inTransferring Caller ID to Memory. After entering the
memory location, REPLACE MEMO? shows in the display.
After power outage or battery replacement, you should place the handset in the base
for about 20 seconds for handset and base to re-synchronize each other.
CONNECTING THE TELEPHONE LINE
1. Plug the telephone line cord into theTEL LINE jack on the back of the base and into
a modular jack.
RINGER SWITCH
The RINGER switch must be ON for the handset to ring during incoming calls.
IMPORTANT: Because cordless phones operate on electricity, you should have
at least one phone in your home that isn’t cordless, in case the power in your
home goes out.
3. Press program to save.
2. Press the memory button again, and the new CID record replaces the old memory
in that location.You will hear a confirmation tone.
INSTALLATION NOTE: Some cordless telephones operate at frequencies that
may cause interference to nearby TVs microwave ovens, and VCRs. To minimize
or prevent such interference, the base of the cordless telephone should not be
placed near or on top of a TV, microwave ovens, or VCR. If such interference
continues, move the cordless telephone farther away from these appliances.
2. Set the RINGER switch (on the handset) to ON.
DEFAULT SETTING
1. Press the program button until DEFAULT SETTING? 1YES 2NO shows in the
display. 2NO is the default setting.
VOLUME
CAUTION:
DELETING THE CURRENT CID RECORD
1. Make sure the phone is OFF (not inTALK mode).
When the phone is ON (inTALK mode) press the + or - button to adjust the listening
level. Choose from four volume settings. VOL 1 is the lowest volume and VOL 4 is the
highest volume.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CONNECTING THE AC (ELECTRICAL) POWER
1. Plug the power supply into the power jack on the back of the base and into an
electrical outlet.
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
THE LIGHTNING
CAUTION: TO REDUCE THE
2. Use the CID/vol (+ or -) button to scroll to the desired record.
3. Press delete.The display shows DELETE CALL ID?
2. Use the CID/vol (+ or -) button or the touch-tone pad on the handset to scroll to
1YES or 2NO.
FLASH AND ARROW RISK OF ELECTRIC SHOCK, DO
HEAD WITHIN THE NOT REMOVE COVER (OR
WARNING:TO
Certain other communications devices may also use the 5.8 GHz frequency for
communication, and, if not properly set, these devices may interfere with each other
and/ or your new telephone. If you are concerned with interference, please refer to
the owner’s manual for these devices on how to properly set channels to avoid
interference. Typical devices that may use the 5.8 GHz frequency for communication
include wireless audio/ video senders, wireless computer networks, multi-handset
cordless telephone systems, and some long-range cordless telephone systems.
We bring good things to life.
WARNING SIGN
ALERTING YOU OF
IMPORTANT
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSETHIS
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VOLTAGE” INSIDE
THE PRODUCT.
BACK). NO USER
MUTE
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
3. Press program to save.You will hear a confirmation tone.
2. Place the handset in the base cradle.The charge indicator turns on, verifying the
battery is charging.
4. Press delete again to erase the record and the next Caller ID record shows in the
display.You will hear a confirmation tone.
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
Use mute during a phone conversation to speak privately and off-line with a third party.
CORDLESS PHONE BASICS
Allow the phone to charge for 16 hours prior to first use. If you don't properly
charge the phone, battery performance is compromised.
EQUIPMENT APPROVAL INFORMATION
1. Press the mute/format button. MUTE shows in the display and the indicator on top
of the handset blinks.The party on the telephone will not hear you.
PRODUCT TO RAIN
OR MOISTURE.
DELETING ALL CID RECORDS
1. Make sure the phone is OFF (not inTALK mode).
Your telephone equipment is approved for connection to the Public SwitchedTelephone Network and is in
compliance with parts 15 and 68, FCC Rules and Regulations and theTechnical Requirements forTelephone
Terminal Equipment published by ACTA.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
CAUTION: Use only the ATLINKS USA, Inc. 5-2594 power supply that
came with this unit. Using other power supplies may damage the unit.
CHARGE/ IN USE INDICATORS
The phone is ON when the indicator on the top of the handset and the charge indicator
on the base is lit.The handset and base indicators flash when you receive a call.
2. Press the mute/format button when finished.
1
Notification to the LocalTelephone Company
2. Use the CID/vol (+ or -) button to display any Caller ID record.
On the bottom of this equipment is a label indicating, among other information, the US number and Ringer
Equivalence Number (REN) for the equipment.You must, upon request, provide this information to your
telephone company.
CALLER ID FEATURES
This unit receives and displays information transmitted by your local phone company.
This information can include the phone number, date, and time; or the name, phone
number, date, and time.The unit can store up to 40 calls for later review.
3. Press and hold the delete button until DELETE ALL? shows in the display.
IMPORTANT INSTALLATION INFORMATION
NOTE : The phone is shipped in Tone Dialing Mode from the manufacturer.
HANDSET AND BASE LAYOUT
4. Press delete again to erase all records.You will hear a confirmation tone.The
display shows NO CALLS.
The REN is useful in determining the number of devices you may connect to your telephone line and still
have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of
the RENs of all devices connected to one line should not exceed 5.To be certain of the number of devices you
may connect to your line as determined by the REN, you should contact your local telephone company.
•
Never install telephone wiring during a lightning storm.
RECEIVING A CALL
Press the talk/callback button to answer a call.
display
•
Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
WALL MOUNTING
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord
and modular plug is provided with this product. It is designed to be connected to a compatible modular jack
that is also compliant. See installation instructions for details.
Date
Number of calls
Time
DIALING A CALLER ID NUMBER
1. Make sure the phone is OFF (not inTALK mode).
2. Use the CID/vol (+ or -) button to display the desired record.
3. Press talk/callback.The number dials automatically.
call back/ talk button
+ CID/ vol button
mute/ format button
•
Never touch non-insulated telephone wires or terminals, unless the telephone line
has been disconnected at the network interface.
MAKING A CALL
1. Press the talk/callback button, and then dial the number.The timer starts after five
seconds.
Notes
•
•
Use caution when installing or modifying telephone lines.
•
This equipment may not be used on coin service provided by the telephone company.
- CID/ vol button
redial button
•
Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone
equipment if you are on a party line. Check with your local telephone company.
Temporarily disconnect any equipment connected to the phone such as faxes,
other phones, or modems.
2. Press the talk/callback button again or place the handset in the cradle to hang up.
OR,
•
•
Notice must be given to the telephone company upon permanent disconnection of your telephone from
your line.
CHANGING THE TELEPHONE NUMBER FORMAT
The mute/format button lets you change the format of the displayed telephone
number.The available formats are as follows.
memory button
#pause button
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation
of this product does not disable your alarm equipment. If you have questions about what will disable
alarm equipment, consult your telephone company or a qualified installer.
IMPORTANT INSTALLATION GUIDELINES
ringer switch
3. While the phone is OFF (not in talk mode), enter the numbers first, and then press
the talk/callback button.
Caller ID phone number
Caller ID name
•
•
•
Install telephone near both a telephone (modular) jack and an electrical power
outlet.
2
Rights of theTelephone Company
*tone/ exit button
7-digit
7-digit telephone number.
Should your equipment cause trouble on your line which may harm the telephone network, the telephone
company shall, where practicable, notify you that temporary discontinuance of service may be required. Where
prior notice is not practicable and the circumstances warrant such action, the telephone company may
temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company
must: (1) promptly notify you of such temporary discontinuance; (2) afford you the opportunity to correct the
situation; and (3) inform you of your right to bring a complaint to the Commission pursuant to procedures set
forth in Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications facilities, equipment, operations or procedures
where such action is required in the operation of its business and not inconsistent with FCC Rules and
Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the
telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service.
CALL WAITING CALLER ID
Provided you subscribe to Call Waiting Caller ID service from your phone company,
you are able to see who is calling while you are on the phone when you hear the call
waiting beep.The caller identification information appears in the display after you hear
the tone.
REDIAL
Avoid sources of noise, such as a window by a busy street, and electrical noise,
such motors, microwave ovens, and fluorescent lighting.
10-digit
11-digit
3-digit area code + 7-digit telephone number.
long distance code “1” + 3-digit area code + 7-digit telephone number.
While the phone is ON (inTALK mode), press the redial button to redial the last
delete button
NOTE: For best results, charge the phone on a flat surface before you mount it
on the wall.
number you dialed (up to 32 digits).
flash button
Avoid heat sources, such as heating air ducts, heating appliances, radiators, and
direct sunlight.
1. Use the CID/vol (+ or -) button to scroll to the number you want to call back.
2. Press talk/callback.The number dials automatically.
program button
OR,
•
•
•
Avoid areas of excessive moisture or extremely low temperature.
Avoid dusty locations.
While the phone is OFF (not in talk mode), press the redial button and then the talk/
callback button to redial the last numbers.
•
Press the flash button to put the current call on hold so you can answer the
incoming call.
1. Turn the base over, and align the four slots on the bottom of the base with the four
tabs on the pedestal.
NOTE: If the telephone number cannot be dialed, press the mute/ format
button to adjust the number, and try again.
page button
FCC RF RADIATION EXPOSURE STATEMENT
Avoid other cordless telephones or personal computers.
2. Insert the tabs into the slots and push upwards until the pedestal snaps securely
into place.
IMPORTANT: In order to use this unit’s Caller ID features, you must subscribe
to either the standard Name/ Number Caller ID Service or Call Waiting Caller ID
Service. To know who is calling while you are on the phone, you must subscribe
to Call Waiting Caller ID Service.
FLASH
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.This
equipment should be installed and operated with a mininum distance of 20 centimeters between the radiator and
your body.This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
MEMORY
3. Slip the mounting holes (on the back of the base and pedestal) over the wall plate
posts, and slide the unit down into place. (Wall plate not included.)
Use the flash button to activate custom calling services such as call waiting, which
are available through your local phone company.
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used
with the belt clip supplied with this product. Use of other accessories may not ensure compliance with FCC RF
Store up to ten 24-digit numbers or 15-characters in memory for quick dialing.This
memory feature is in addition to the CID memory log, which stores up to 40 CID records.
exposure guidelines.
NOTE: If desired, gather the extra telephone line and power supply cord
together, fasten with a wire tie, and store inside the wall mounting pedestal.
TIP: Don’t use the talk/ callback button to activate custom calling services such
as call waiting, or you’ll hang up the phone.
ATLINKS USA, Inc.
101 West 103rd Street
Indianapolis, IN 46290
© 2003 ATLINKS USA, Inc.
Trademark(s) ® Registered
Marca(s) Registrada(s)
charge indicator
Model 25830
16223960 (Rev. 1 DOM E)
03-41
Printed in China
charge
|