Dell 1501FP User Manual

'HOOŒꢀꢁꢂꢃꢁ)3ꢀ)ODWꢀ3DQHOꢀ&RORUꢀ0RQLWRUꢀ  
4XLFNꢀ6HWXSꢀ*XLGH  
6DIHW\ꢀ,QVWUXFWLRQV  
Observe the following safety guidelines when connecting and using your monitor:  
Be sure your monitor is electrically rated to operate with the AC power available in your location.  
Locate your monitor near an easily accessible electrical outlet.  
Place the monitor on a solid surface and treat it carefully. The screen can be damaged if dropped, sharply hit, or  
touched with a sharp or abrasive implement.  
Put your monitor in a location with low humidity and a minimum of dust.  
Never use your monitor if the power cable has been damaged. Do not allow anything to rest on the power cable, and  
keep the cable away from where people could trip over it.  
Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock.  
To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitors  
case.  
Be sure to hold the plug, not the cable, when disconnecting the monitor from an electrical outlet.  
Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be  
blocked or covered. Also, avoid using the monitor on a bed, sofa, rug, or other soft surface. Doing so may block the  
ventilation openings in the bottom of the cabinet. If you put the monitor in a bookcase or some other enclosed space,  
be sure to provide adequate ventilation.  
Do not expose the monitor to rain or use it near water. If the monitor accidentally gets wet, unplug it and contact  
an authorized dealer immediately. You can clean the exterior of the monitor with a damp cloth when necessary, but  
be sure to unplug the monitor first.  
If your monitor does not operate normally—in particular, if there are any unusual sounds or smells coming from it—  
unplug the monitor immediately and contact an authorized dealer or service center.  
&RQQHFWLQJꢀ<RXUꢀ0RQLWRUꢀWRꢀDꢀ&RPSXWHU  
7+,6ꢀ021,725ꢀ6833257ꢀ%27+ꢀ',*,7$/ꢀ$1'ꢀ$1$/2*ꢄꢀ,7ꢀ,6ꢀ5(&200(1'('ꢀ7+$7ꢀ  
7+(ꢀ',*,7$/ꢀ&$%/(ꢀ,6ꢀ86('ꢀ)25ꢀ237,080ꢀ3(5)250$1&(ꢄ  
$ꢀꢁ)RUꢁ'LJLWDOꢁ,QSXW  
2
3
4
5
1. Turn off your computer and unplug your computer’s power cord.  
2. DVI-D cable (with white connector) has to be connected to the back of your monitor.  
3. Attach the other end of DVI-D signal cable to digital output port on the back of your computer for digital video  
connection.  
4. Connect power cord of your monitor to the power port on the back of the monitor.  
5. Plug power cords of your computer and your monitor into a nearby outlet.  
6. Turn on your monitor and computer.  
7. If your monitor displays an image, installation is complete. If it does not display an image, refer to the trouble-  
shooting section of this guide.  
'ULYHUꢀ,QVWDOODWLRQꢀ  
Use the monitor CD to install the appropriate monitor driver for your operating system.  
0LFURVRIW ꢀ:LQGRZV ꢀꢅꢆꢀ2SHUDWLQJꢀ6\VWHP  
Windows 98 automatically detects the new monitor and displays the Add New Hardware Wizard dialog box if the monitor driver  
is not already installed.  
1. Insert the monitor CD into the CD-ROM drive, and click Next> twice when the Add New Hardware Wizard dialog box  
appears.  
2. Click the CD-ROM drive box to install the drivers from the CD and then click Next>.  
3. Confirm that the driver was found on the CD, and click Next> twice to install the driver.  
4. Click Finish to exit the Add New Hardware Wizard dialog box.  
To manually install or update the driver, perform the following steps:  
1. Click Start—> Settings—> Control Panel and then double-click Display.  
2. In the Display Properties window, click the Settings tab, and then click Advanced.  
3. Click the Monitor tab, and then click Change.  
4. When the Update Device Driver Wizard dialog box appears, follow the steps in the previous paragraph.  
0LFURVRIWꢀ:LQGRZVꢀꢅꢂꢀ2SHUDWLQJꢀ6\VWHP  
First determine the Windows 95 version installed on your computer by right-clicking the My Computer icon on the desktop and  
selecting Properties. The version number is listed under System. Perform the steps for the appropriate version.  
Version 4.00.950A  
1. Click Start—> Settings—> Control Panel and then double-click Display.  
2. In the Display Properties window, click the Settings tab and then click Change Display Type.  
3. In the Change Display Type window, click Change and then click Have Disk.  
4. Insert the monitor CD into the CD-ROM drive, type d:\ (change the drive letter to match your CD-ROM drive if it is not drive  
D) in the Copy manufacturer's files from: box, and click OK.  
5. In the Select Device window, click the appropriate monitor model and then click OK.  
6. In the Change Display Type window, click Close.  
7. In the Display Properties window, click OK.  
Version 4.00.950B  
1. Click Start—> Settings—> Control Panel and then double-click Display.  
2. In the Display Properties window, click the Settings tab and then click Advanced Properties.  
3. In the Advanced Display Properties window, click the Monitor tab and then click Change.  
4. In the Select Device window, click Have Disk.  
5. Insert the monitor CD into the CD-ROM drive, type d:\ (change the drive letter to match your CD-ROM drive if it is not drive  
D) in the Copy manufacturer's files from: box, and click OK.  
6. In the Select Device window, click the appropriate monitor model and then click OK.  
7. In the Advanced Display Properties window, click Close.  
8. In the Display Properties window, click OK.  
$FFHVVLQJꢀWKHꢀ8VHUꢇVꢀ*XLGHꢀ2QOLQHꢀRUꢀYLDꢀ&'  
To view the latest monitor Users Guide, access the SUPPORT section of the Dell Web site (http://support.dell.com).  
If you do not have Internet access, you can access the guide on the monitor CD:  
1. Insert the monitor CD into your CD-ROM drive.  
A start-up document should launch automatically; however, if the start-up document does not launch automatically, click  
Start—> Run, type D:\monitor.htm, and click OK. (Substitute the correct CD-ROM drive letter if it is not the D drive.)  
2. Click the appropriate icon to open the User's Guide in the desired language.  
NOTE: All applicable warranty and regulatory information regarding your monitor is contained in the Users Guide on your CD.  
7URXEOHVKRRWLQJꢀ7LSV  
0RQLWRUꢀ+DVꢀ1Rꢀ3RZHU  
If the monitors power indicator is off and no image appears on the display, perform the following checks:  
Ensure that the power cable is fully inserted in the monitors power port and the electrical outlet.  
Test the electrical outlet by plugging in a working electrical device such as a lamp.  
Ensure that the power button has been depressed, and wait for the power indicator to light.  
Try another power cable on the monitor. Use the computers power cable and turn on the monitor with the signal cable discon-  
nected. If the monitor is working correctly, a self-test pattern appears.  
1Rꢀ,PDJHꢀ,Vꢀ'LVSOD\HGꢀRQꢀWKHꢀ0RQLWRUꢀ  
If the monitor power indicator is on but no image appears on the display, perform the following checks:  
Ensure that the video connector is seated properly. Tighten the connector screws securely with your fingers.  
Ensure that the computer is on.  
Increase brightness and contrast controls.  
Turn off the monitor and unplug the signal cable. Check the cable connector for bent or broken pins.  
With the signal cable still disconnected, turn on the monitor. If the monitor is working correctly, a self-test pattern appears.  
Perform a monitor reset or recall.  
,03257$17ꢂꢁ  
%HIRUHꢁFRQWDFWLQJꢁ'HOOꢁIRUꢁWHFKQLFDOꢁDVVLVWDQFHꢃꢁUHIHUꢁWRꢁWKHꢁ7URXEOHVKRRWLQJꢁVHFWLRQꢁLQꢁWKHꢁ  
8VHUꢄVꢁ*XLGHꢁRQꢁ\RXUꢁPRQLWRUꢁ&'ꢀꢁ7KLVꢁVHFWLRQꢁFRQWDLQVꢁGHWDLOHGꢁLQIRUPDWLRQꢁIRUꢁUHVROYLQJꢁ  
PRVWꢁPRQLWRUꢁSUREOHPVꢀ  
____________________________________  
Information in this document is subject to change without notice.  
© 1999 Dell Computer Corporation. All rights reserved.  
Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden.  
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Computer Corporation; Microsoft and Windows are registered trademarks  
of Microsoft Corporation.  
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Com-  
puter Corporation disclaims any proprietary interest in trademarks and trade names other than its own.  

HP Hewlett Packard Hewlett Packard Computer Monitor LE2002XM User Manual
Hanns G Computer Monitor HS233 User Manual
GE 26937 User Manual
Fisher Paykel OR90 User Manual
Datel DKT2104 CT User Manual
Cypress CY7C1320CV18 267BZXC User Manual
Cannon 50cm Free Standing Gas Cooker C50GKX User Manual
AT T TL32200 User Manual
Asus Graphics Card HD7970 DC2 3GD5 User Manual
Asus EM64T User Manual