FUJITSU SERVIS IP KVM FW D4016NP User Manual

SERVISTM IP-KVM FW-D2016NP / FW-D4016NP Quick Start Guide  
Step2 Connecting the Device  
Introduction  
1. Connect the device as shown below.  
3. The following dialog box  
appears. Click [Next].  
3. The following Setup window  
appears. Click [Network].  
4. The following Network  
window appears. Specify the  
IP address here.  
- Thank you for purchasing this product. This "Quick Start  
Guide" describes the items contained in the packaging,  
and explains the initial setup and procedures for basic  
operations. Make sure to read this manual when using  
the device.  
4. On the following dialog box, if  
you agree with the statement,  
select the corresponding option,  
and click [Next].  
2. When you have connected the device, turn on each  
connected server first, and then the device.  
Ethernet  
- Read the "Safety Precautions" in the CD-ROM provided  
with the device in advance for its correct use. The  
"Safety Precautions" includes indications to obviate any  
chance of accident or damage to you and people near  
you, and your property.  
Telephone  
Network  
Power  
Source  
Modem  
Remote User  
- For details on operations, refer to the Installer/User  
Guide provided with the device.  
FW-D2016NP /  
FW-D4016NP  
5. The contents of the dialog  
box are shown as below.  
Select the install destination,  
and click [Next].  
6. The contents of the dialog box  
are shown as below. To set an  
icon on the desktop, select the  
check box and click [Install].  
6. The following message  
appears, and the device  
restarts. If the [Free] tag is  
shown 1 minute later, the  
network setup is complete.  
5. When you specify a fixed  
IPv4 address, click the  
"Static" and the "IPv4" radio  
button, enter values in the IP  
address, Netmask and  
Gateway fields, and click the  
[OK] button. (For DHCP,  
select the corresponding  
Opion.)  
Step 1 Checking the Components  
Check that the following items are contained in the  
packaging.  
Local Connection  
- The device  
- Power cables  
Server  
Server  
Server  
3 pin plug-IEC320 socket (AC100V)…1  
IEC320 plug-IEC320 (AC200V)…1  
Server  
- Serial Cable … 1  
7. The following dialog box  
appears. Click [YES].  
8. The following dialog box is  
shown, and installation starts.  
Step3 Setting Up the Network  
- Flanges … 2  
For the initial settings of the device, set the IP address by a local  
operation.  
- Screws for flange …4  
1. The device starts operating  
about 1 minute after it is  
turned on, and the [Free] tag  
appears in the monitor for  
local connection.  
2. Press the [PrintScreen] key  
on the local keyboard once,  
then the following Main  
window appears. Click  
[Setup].  
- CD-ROM …1  
Installer/User Guide  
FW-Client Software  
Step4 Installing FW-Client  
9. When the contents of the  
dialog box are shown as  
below, the installation is  
complete. Click [Done].  
By using the device, install "FW-Client" – a tool for managing the  
target device – into the remote client’s PC. The following explains  
how to install into a Windows computer.  
- Warranty certificate … 1  
* This warranty is valid in Japan.  
1. Launch Setup.exe,  
contained in the CD-ROM  
provided with the device.  
2. The following dialog box  
appears. Click [OK].  
- License information … 1  
- China RoHS guide …1  
- Quick Start Guide  
(Japanese, English) … 1 each  
(Continued to the reverse side)  
NC14013-0923RS-02  
<Inquiry about our products>  
FUJITSU COMPONENT LIMITED Marketing Group  
TEL: 81-3-5449-7006  

Xerox Nuvera 100 Ea User Manual
Sharp Ar Bc320 User Manual
Sears 200713121 User Manual
Saft Batteries Automobile Parts Lst User Manual
Ricoh Priport Jp5000 User Manual
Oricom Am880 User Manual
JVC DX J11UG User Manual
Devanti Ice Maker User Manual
BROTHER HL 5440D User Manual
ASUS RT AC3100 02 User Manual